netsh important command

Show Interfaces and Indexes netsh interface ipv4 show interfaces Set IPV4 Address netsh interface ipv4 set address name="3"(name of index) source=static address=10.3.66.4 mask=255.255.255.0 gateway=10.3.66.1 Set DNS Address netsh…

AFP vs. SMB and NFS file sharing for network clients

Native file sharing protocols always win out In an intranet, network clients have several options, such as AFP, NFS and SMB/CIFS, to connect to their file server. But for the best performance, and 100% compatibility, the native client file…

RAID

RAID is an acronym that stands for Redundant Array of Inexpensive or Redundant Array of Independent Disks. RAID is a term used in computing. With RAID, several hard disks are made into one logical disk. RAID 0 (Strip) Not Fault Tolerant …

What’s the Difference Between GPT and MBR When Partitioning a Drive?

A partition structure defines how information is structured on the partition, where partitions begin and end, and also the code that is used during startup if a partition is bootable. If you’ve ever partitioned and formatted a disk—or set…

Virtual Machine Switches in Hyper-V

I have seen some folks who are confused about the concept behind the virtual machine switches. so, I have decided to explain this concept in a simple way: External : Communicate outside of host (Internet) Internal: Virtual machine can talk…

RIP, EIGRP, OSPF

RIP Maximum hop count 15 RIP ( 30 Sec update to other routers) Doesn't analyse traffi Distance Vector RIPng( send through hex to other routers FF2::9) EIGRP Only to Cisco Protocol Distance vector Analyses traffic …